image description image description image description image description

CPS/Atrex®

(Megatrex Technology)

The Atrex®* Disperser is part of an efficient Reject Recovery Process offered through GL&V. The cleaner and/or screen reject flow containing filler is treated with the Atrex Disperser, so that the particle size of the material is reduced. After dispersion, the material is led to a Dilution Water Tank and pumped through two stages of cleaners for optimal separation of contaminants.

 

* Atrex® is a registered trademark of MEGATREX OY and is under exclusive license to GL&V.

The Atrex® technology is also used for effectively treating Coating Effluent. A 90% reduction of the measured reject is an average to be expected.

  • Efficient dispersing results with one motor
  • Contra-rotating rotors resulting in repeated impacts, high shear forces, turbulence and over/under-pressure pulses
  • Disintegrates fiber knots, coating and filler flakes
  • Continuous operation
  • Good slurry quality, high solids
  • Short mixing and residence time
  • Skid Mounted, compact one floor lay out
  • Energy efficient
general requests

CPS/Atrex®

(Megatrex Technology)

The Atrex®* Disperser is part of an efficient Reject Recovery Process offered through GL&V. The cleaner and/or screen reject flow containing filler is treated with the Atrex Disperser, so that the particle size of the material is reduced. After dispersion, the material is led to a Dilution Water Tank and pumped through two stages of cleaners for optimal separation of contaminants.

 

* Atrex® is a registered trademark of MEGATREX OY and is under exclusive license to GL&V.

  • Further Details

    The Atrex® technology is also used for effectively treating Coating Effluent. A 90% reduction of the measured reject is an average to be expected.

  • Technical Information

    • Efficient dispersing results with one motor
    • Contra-rotating rotors resulting in repeated impacts, high shear forces, turbulence and over/under-pressure pulses

  • Benefits

    • Disintegrates fiber knots, coating and filler flakes
    • Continuous operation
    • Good slurry quality, high solids
    • Short mixing and residence time
    • Skid Mounted, compact one floor lay out
    • Energy efficient

Feedback

Thank you, Your Comments / Suggestions submitted successfully.